Laser water cooling system maintenance
Maintenance, the word has been fully exerted by skin care products and healthcare products, and it is not limited to the female circle, men have become entangled in "maintenance", and recently there are men's air cushion BB out in South Korea, designed to protect the skin and even skin tone. In addition, some people compare two women of the same age, one person always keeps her face and body, the other does not maintain, different face, skin and body shape. So how important is maintenance! First of all, we don't discuss whether to maintain the quality of the product, just maintenance, which is very important, then how should you keep the laser device in your hands?
For the maintenance of 808nm diode laser hair removal machine, we have to say the filter of the cooler, especially the high-power laser equipment. The main function of the filter is to purify the impurities in the chiller, to ensure the cleanliness of the circulating water, and to ensure that the water system is stable and clean! If the chiller has no filter, when the circulating water flows, the temperature of the device is lowered. Over time, it will precipitate some impurities, which will form dirt around the Q head and the cavity, affecting the quality of the laser lamp. It is also impossible to obtain a good water circulation to cool the laser equipment. Naturally, the stability of the laser generator cannot be guaranteed, and the service life and treatment effect of the laser machine will be affected after a long time.
At the heart of the filter is the filter element, which absorbs impurities from the water, so we have to replace the filter element regularly. Under normal use conditions: It is generally recommended that customers replace the filter element within about 2 months. If the use environment is poor, it is best to check frequently. Once the water quality is found to be dirty in a short time, we should replace the filter element in time.
Recommendations for water used by chillers:
1, the best water is deionized water and distilled water, this water has fewer impurities, so the water system is not easy to dirty, but a little expensive.
2. In general, we recommend using pure water of good quality, which can be used to meet the needs and benefits of the equipment. But we saw on the Internet that someone said "you can use mineral water." Now we suggest that it is best not to use this mineral water. Why? Because mineral water contains many metal elements, they all exist in the form of ions. When water absorbs heat, they combine into compounds, which condense on the surface of the Q Switched ND YAG Laser Machine and affect the quality of the beam.
3, laser cooling water replacement cycle is 1-2 months, change the water once. If the unit is not used for a long time, drain the internal cooling water.
https://www.sk-eily.com
For the maintenance of 808nm diode laser hair removal machine, we have to say the filter of the cooler, especially the high-power laser equipment. The main function of the filter is to purify the impurities in the chiller, to ensure the cleanliness of the circulating water, and to ensure that the water system is stable and clean! If the chiller has no filter, when the circulating water flows, the temperature of the device is lowered. Over time, it will precipitate some impurities, which will form dirt around the Q head and the cavity, affecting the quality of the laser lamp. It is also impossible to obtain a good water circulation to cool the laser equipment. Naturally, the stability of the laser generator cannot be guaranteed, and the service life and treatment effect of the laser machine will be affected after a long time.
At the heart of the filter is the filter element, which absorbs impurities from the water, so we have to replace the filter element regularly. Under normal use conditions: It is generally recommended that customers replace the filter element within about 2 months. If the use environment is poor, it is best to check frequently. Once the water quality is found to be dirty in a short time, we should replace the filter element in time.
Recommendations for water used by chillers:
1, the best water is deionized water and distilled water, this water has fewer impurities, so the water system is not easy to dirty, but a little expensive.
2. In general, we recommend using pure water of good quality, which can be used to meet the needs and benefits of the equipment. But we saw on the Internet that someone said "you can use mineral water." Now we suggest that it is best not to use this mineral water. Why? Because mineral water contains many metal elements, they all exist in the form of ions. When water absorbs heat, they combine into compounds, which condense on the surface of the Q Switched ND YAG Laser Machine and affect the quality of the beam.
3, laser cooling water replacement cycle is 1-2 months, change the water once. If the unit is not used for a long time, drain the internal cooling water.
https://www.sk-eily.com
评论
发表评论